UniPunch
Press Mounting Equipment
TP Series
TP-1 1/4 ROUND TUBE PUNCHING PART #: TP-1 1/4R
| Max. Hole Diameter | 0.5 in | Max. Shut Height | 6.25 in |
|---|---|---|---|
| Max. Tube Size (Round or Square) | 1.25 in | Max. Wall Thickness (Mild Steel) | 0.125 in |
| Min. Shut Height | 6.125 in | Min. Tube Size (Round or Square) | 0.5625 in |
| Min. Wall Thickness | 0.031 in | ||
TP-1 1/4 SQUARE TUBE PUNCHING PART #: TP-1 1/4S
| Max. Hole Diameter | 0.5 in | Max. Shut Height | 6.25 in |
|---|---|---|---|
| Max. Tube Size (Round or Square) | 1.25 in | Max. Wall Thickness (Mild Steel) | 0.125 in |
| Min. Shut Height | 6.125 in | Min. Tube Size (Round or Square) | 0.5625 in |
| Min. Wall Thickness | 0.031 in | ||
TP-2 3/8 ROUND TUBE PUNCHING PART #: TP-2 3/8R
| Max. Hole Diameter | 0.5 in | Max. Shut Height | 6.75 in |
|---|---|---|---|
| Max. Tube Size (Round or Square) | 2.375 in | Max. Wall Thickness (Mild Steel) | 0.125 in |
| Min. Shut Height | 6.625 in | Min. Tube Size (Round or Square) | 1.3125 in |
| Min. Wall Thickness | 0.031 in | ||
TP-2 3/8 SQUARE TUBE PUNCHING PART #: TP-2 3/8S
| Max. Hole Diameter | 0.5 in | Max. Shut Height | 6.75 in |
|---|---|---|---|
| Max. Tube Size (Round or Square) | 2.375 in | Max. Wall Thickness (Mild Steel) | 0.125 in |
| Min. Shut Height | 6.625 in | Min. Tube Size (Round or Square) | 1.3125 in |
| Min. Wall Thickness | 0.031 in | ||
TP-2M
| Max. Punch Diameter (Absolute) | 0.4375 in | Max. Tube Size (Round or Square) | 1 in |
|---|---|---|---|
| Max. Wall Thickness (Mild Steel) | 0.125 in | Min. Die Clearance | 0.012 in |
| Min. Shut Height | 9.25 in | Min. Wall Thickness | 0.031 in |
| Operating Shut Height | 9.375 in | Unit Open Height | 11.8125 in |
TP-2R ROUND TUBE PUNCHING UNIT PART #: TP-2R
| Max. Punch Diameter (Absolute) | 0.4375 in | Max. Tube Size (Round or Square) | 1 in |
|---|---|---|---|
| Max. Tube size (Round) | 1 in | Max. Wall Thickness (Mild Steel) | 0.125 in |
| Min. Die Clearance | 0.012 in | Min. Material Thickness (Absolute) | 0.031 in |
| Min. Shut Height | 9.25 in | Min. Wall Thickness | 0.031 in |
| Operating Shut Height | 9.375 in | Unit Open Height | 11.8125 in |
TP-2S SHAPED TUBE PUNCHING UNIT PART #: TP-2S
| Max. Punch Diameter (Absolute) | 0.4375 in | Max. Tube size (Square) | 0.875 in |
|---|---|---|---|
| Max. Wall Thickness (Mild Steel) | 0.125 in | Min. Die Clearance | 0.012 in |
| Min. Shut Height | 9.25 in | Min. Tube Size (Round or Square) | 0.5625 in |
| Operating Shut Height | 9.375 in | Unit Open Height | 11.6875 in |
