Lubrication Equipment - JP-2-1
JP-2-1
The Jet-Set Jet Pack Module provides you with a complete automatic airless spray system. Jet Pack Modules are all stainless steel with standard 2.5 gallon tanks. The Jet Pack System utilizes reusable filters, air filter regulators and stainless steel pumps with quick disconnect connections for nozzles. Jet Pack Systems can also be supplied with 5 gallon tanks if needed.
Whether you use one pump in the package or several, each pump can be adjusted to meet the lubricant requirements at each station. The Jet Pack System is capable of spraying light or water soluble oils through individually controlled pumps (#7100). Jet Pack Modules are activated by an air limit switch mounted on a 200 lb. pull magnet, which can be easily positioned.
All the Jet Pack systems offer the #7100 Jet Pack pump as standard feature that offers high life cycles with very low maintenance. Utilizing stainless steel components and Viton seals, the #7100 pump will provide millions of trouble-free cycles. Volume output is from 0 to 1 cc of fluid. Jet Pack Pumps are mounted on manifolds for ease of pump change-over.
Jet Pack Modules - 2.5 Gallon Jet Pack Modules - 5 Gallon
Air activated systems
Air Activated Systems
JP-2-1 One Pump
JP-5-1 One Pump
JP-2-2 Two Pump
JP-5-2 Two Pump
JP-2-3 Three Pump
JP-5-3 Three Pump
JP-2-4 Four Pump
JP-5-4 Four Pump
Part Number Description
1. 202
2.5 Gallon stainless steel tank and frame
2. 620
Standard filter
3. 810
Draw latch
4. 505 F
Stopcock
5. 834
Male elbow
6. 7100
Stainless steel pump
7. 7122 1
Single pump manifold
7122 2
Two pump manifold
7122 3
Three pump manifold
7122 4
Four pump manifold
7122 5
Five pump manifold
8. 820
Brass connector
9. 850
Brass elbow
10.1501
Filter/regulator
11. 814
Brass Adaptor
12. 816 SA
Air switch assembly
13. 815
Cable clamp
14. 816
Triple tube - 11' sections
15. 525
Sight glass